Liaoning, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Registered Capital:
500000 RMB
Plant Area:
101~500 square meters
Management System Certification:
ISO 9001, ISO 14001
Average Lead Time:
Peak season lead time: one month
Off season lead time: 1-3 months
Sample Available
Russian / Spanish Speaker

Immerse Sampler, Sampler, Immersion Samplers manufacturer / supplier in China, offering Immersion Sampler (A. S-07.10), Mandrel Bar, Copper Mould Tube-High Working Life and so on.

Gold Member Since 2017
Audited Supplier
  • Immersion Sampler (A. S-07.10)
  • Immersion Sampler (A. S-07.10)
  • Immersion Sampler (A. S-07.10)
  • Immersion Sampler (A. S-07.10)
  • Immersion Sampler (A. S-07.10)
  • Immersion Sampler (A. S-07.10)

Immersion Sampler (A. S-07.10)

Get Latest Price
Min. Order: 1,000 Pieces
Port: Shanghai, China
Production Capacity: 1000000PCS/Annual.
Payment Terms: L/C, T/T, D/P
Certification: ISO
Color: Fixed
Customized: Customized
Standard: International
Type: Connection
Material: Paper Tube

You Might Also Like

Loading...

Basic Info

Model NO.
A. S-07.10
Trademark
ANSSEN
Transport Package
Standard Export Packing
Specification
LENGTH 300MM-1500MM
Origin
China
HS Code
90318090
Immersion Sampler (A. S-07.10)

Immersion Sampler (A. S-07.10)


We are ANSSEN Metallurgy Group, your first choice!
ANSSEN Immerse sampler & stream sampler
Widely selling to USA, Italy, Germany, Brasil, Egypt, Saudi Arabia, Greece

1. General introduction
During the process of smelting, in order to master the changing of the liquid steel composition, sampling must be taken to get process analysis. During the pouring process, end production samples often are taken to get end production analysis. The progress of science and technology is pushing the progress of detection techniques. So studying fast process analysis methods and shortening sample taking time are the channels to raise analysis techniques and reinforce quality control.

2. Application range:
The sampler is suitable for every steel factory to sample in tundish, ladle and horizontal casting. It has

3. Principle
When the sample instrument is put into the liquid steel, according to the floating continuous equation and static pressure effect of molten steel, the liquid steel will flow into the sample room by itself through the instrument taking the sample. The liquid steel in the sample room can be analyzed quickly and get C, Mn, P, S etc.

Main technical parameter
(1)test success rate 90%.
(2)steel sample is full, quality is thick, smooth and no atmospheric holes.
(3)the time of taking a sample is 4 to 6 seconds in applied sphere.

Using Method
1. We can use a special measuring gun, then stick the gun or steel tube into the bottom of the sample instrument to prop up the turn of the gun.

2. When measuring of the sample molten steel should have a bent about 60 to 65degrees then stick into the molten steel. The depth of sticking can be above 350mm, hold for 4 to 6 seconds.

3. After taking the sample instrument from the furnace, knock it on the ground, so the sample of steel will fall down on the ground.

4. It is best to take a sample when the molten steel temperature is above 1500degrees Steel

Sample size sample in cup(mm)
Diameter thickness weight(g)
32 13 140g

Points for attention
1. When taking a sample, first dig up dregs in order to provide blockage.
2. The depth and time when putting instrument into molten steel should be strictly carried out.

Immersion Sampler (A. S-07.10) Immersion Sampler (A. S-07.10) Immersion Sampler (A. S-07.10)




 

Send your message to this supplier

*From:
*To:
avatar Mr. Aaron Huang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now